Tripod Mounting; Lcd Monitor And Viewfinder; Brightness Adjustment Of The Display - JVC GR-DVM76 Instructions Manual

Tripod Mounting

Align the screw on the tripod with the camcorder's
mounting socket. Then tighten the screw.
Some tripods are not equipped with studs.
CAUTION:
When attaching the camcorder to a tripod, extend
its legs to stabilize the camcorder. It is not advised
to use small sized tripods. This may cause damage
to the unit by falling over.

LCD Monitor And Viewfinder

While using the LCD monitor:
Make sure the viewfinder is pushed back in. Open
the LCD monitor fully. It can rotate 270º (90º
downward, 180º upward).
While using the viewfinder:
Make sure the LCD monitor is closed and locked.
Pull out the viewfinder fully.
Be sure to pull out the viewfinder until you hear a
click, otherwise it may be pushed back in during
use.
90˚
180˚
Brightness Adjustment Of The
Display
Rotate the MENU (MENU/BRIGHT) Wheel until the
bright level indicator on the display moves and the
appropriate brightness is reached.
BR I GHT
13
EN
MENU/
BRIGHT Wheel