System Connections; Connection To A Personal Computer - JVC GR-DVP7EA Instructions Manual

Table of Contents

Connection To A Personal Computer

[A] Using USB cable

[B] Using DV cable

Connector

Cover*

When connecting the cable, open the cover.

[A] Using USB cable

This camcorder can transfer still images to a PC by

using the provided software.

[B] Using DV cable

It is also possible to transfer still images to a PC with

a DV connector by using software equipped with the

PC or commercially available software.

Connect the camcorder to your PC using the

appropriate cable as shown in the illustration.

If you are using the USB connection, set the

VIDEO/MEMORY switch to "MEMORY".

Turn the camcorder's Power Switch to "P"

while pressing down the Lock Button located on

the switch and turn on the PC.

● Refer to the instruction manual of the software

on how to transfer a still image to the PC.

NOTES:

● Refer to "SOFTWARE INSTALLATION AND USB

CONNECTION GUIDE" for the installation of the

bundled software and drivers.

● It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the battery

pack. (

pg. 11)

Connector

Cover*

To USB

To DV IN/OUT

Core filter

USB cable (provided)

DV cable

(optional)

Core filter

● Never connect the USB cable and the DV cable

simultaneously to the camcorder. Connect only

the cable you wish to use to the camcorder.

● When using a DV cable, be sure to use the

optional JVC VC-VDV206U or VC-VDV204U DV

cable depending on the type of DV connector (4

or 6 pins) on the PC, or use the DV cable

provided with the capture board.

● If the PC connected to the camcorder via the USB

cable is not powered, the camcorder does not

enter the USB mode.

● The date/time information cannot be captured into

the PC.

● Refer to the instruction manuals of the PC and

Software.

● The still images can also be transferred to a PC

with a DV connector-equipped capture board.

● The system may not work properly depending on

the PC or capture board you are using.

"USB MODE" and/or "ACCESSING FILES"

appears on the LCD monitor while the PC is

accessing data in the camcorder or the camcorder

is transferring a file to the PC.

NEVER disconnect the USB cable while

"ACCESSING FILES" is displayed on the LCD

monitor since this can result in product damage.