System Connections; Connection To A Personal Computer - JVC GR-DVL910A Instructions Manual

68
EN
[A]Using USB or PC connection cable
[B] Using DV cable
VIDEO/DSC Switch (GR-DVL910A/DVL510A/DVL910EA/
DVL510EA only; open the LCD monitor to access this switch.)

Connection To A Personal Computer

[A] Using USB or PC connection cable
This camcorder can transfer still images to a PC by
using the software (GR-DVL910A/DVL510A/
DVL450A/DVL313A/DVL310A/DVL910EA/
DVL510EA: provided, GR-DVL210A/DVL210EA:
optional software HS-V16KIT).
[B] Using DV cable
It is also possible to transfer still images to a PC with
a DV connector by using software equipped with the
PC or commercially available software.
1
Make sure the camcorder and PC are turned off.
2
Connect the camcorder to your PC using the
appropriate cable as shown in the illustration.
3
For GR-DVL910A/DVL510A/DVL910EA/
DVL510EA Owners: If you are using the USB
connection, set the VIDEO/DSC switch to "DSC".
•Only the still images stored in the memory
card can be transferred to a PC.
4
Turn the camcorder's Power Switch to "
while pressing down the Lock Button located on
the switch and turn on the PC.
•Refer to the instruction manual of the software
on how to transfer a still image to the PC.
5
When finished, turn off the PC first, then the
camcorder.
Downloaded from:
GR-DVL450A/DVL313A/DVL310A/DVL210A/DVL210EA only
To PC
(DIGITAL PHOTO)
To USB
GR-DVL910A/DVL510A/DVL910EA/DVL510EA only
Power Switch
To DV
https://www.usersmanualguide.com/

SYSTEM CONNECTIONS

PC connection cable (provided
with GR-DVL450A/DVL313A/
DVL310A only)
USB cable
(provided)
OR
Core filter
DV cable
(optional)
NOTES:
● It is recommended to use the AC Adapter as the
power supply instead of the battery pack
( pg. 9).
● Never connect the USB or PC connection cable
and the DV cable simultaneously to the
camcorder. Connect only the cable you wish to
use to the camcorder.
● If the PC connected to the camcorder via the USB
cable is not powered, the camcorder does not
enter the USB mode.
● The date/time information cannot be captured into
the PC.
● Refer to the instruction manuals of the PC and
Software.
● The still images can also be transferred to a PC
with a DV connector-equipped capture board.
● When using a DV cable, be sure to use the
optional JVC VC-VDV206U or VC-VDV204U DV
cable depending on the type of DV connector (4
or 6 pins) on the PC, or use the DV cable provided
with the capture board.
● The system may not work properly depending on
the PC or capture board you are using.
For GR-DVL910A/DVL510A/DVL910EA/
"
DVL510EA Owners:
"USB MODE" and/or "ACCESSING FILE" appears
on the LCD monitor while the PC is accessing data
in the camcorder or the camcorder is transferring a
file to the PC.
NEVER disconnect the USB cable while
"ACCESSING FILE" is displayed on the LCD
monitor since this can result in product damage.
To
RS-232C
To USB
connector
PC
Core filter
To DV
connector
PC with DV
connector