Deleting Files - JVC GR-DVM76 Instructions Manual

Deleting Files

Previously stored files can be deleted either one at a
time or all at once.
SELECT Button
(GR-DVM96 only)
Rewind Button (3)
Fast-Forward Button (5)
MENU Wheel
1
Load a memory card. (
2
Set the VIDEO/MEMORY Switch to "MEMORY".
3
Set the Power Switch to "P" while pressing
down the Lock Button located on the switch.
4
Open the LCD monitor fully, or pull out the
viewfinder fully.
The type of file (IMAGE, E-MAIL CLIP or
SOUND) which has been played back at the
last time is displayed.
If you want to select another type of file, go to
step 5.
If not, go to step 7.
5
Press SELECT. The MEMORY SELECT screen
appears.
6
Rotate the MENU Wheel to select the desired
type of file, and press it.
7
Press the MENU Wheel in. The Menu Screen
appears.
8
Rotate the MENU Wheel to select "DELETE", and
press it. The Sub Menu appears.
VIDEO/MEMORY
Switch
Power Switch
OFF
Lock Button
pg. 17)
To delete the currently displayed file
9
Rotate the MENU
Wheel to select
"CURRENT", and
press it. The DELETE
screen appears.
10
Press 3 or 5
to select the desired
file.
11
Rotate the MENU
Wheel to select
"EXECUTE", and press
it.
To cancel deletion,
select "RETURN".
Repeat steps 10 and
11 for all files you
want to delete.
NOTE:
If the " " mark appears, the selected file is
protected and cannot be deleted.
To delete all files stored in the memory
card
9
Rotate the MENU Wheel to select "ALL", and
press it. The DELETE screen appears.
10
Rotate the MENU Wheel to select "EXECUTE",
and press it.
To cancel deletion, select "RETURN".
NOTES:
Protected files ( pg. 31) cannot be deleted with
the above operation. To delete them, remove
protection first.
Once files are deleted, they cannot be restored.
Check files before deleting.
CAUTION:
Do not remove the memory card or perform any
other operation (such as turning off the
camcorder) during deletion. Also, be sure to use
the provided AC Adapter, as the memory card may
be corrupted if the battery becomes exhausted
during deletion. If the memory card becomes
corrupted, initialize it. (
33
EN
M E NU
DELETE CUR RENT
ALL
RETURN
D ELETE
DELETE?
EXECUTE
RETURN
pg. 36)