Table of Contents
Advertisement
Introduction
This section contains general information about this guide and the Extron XTP T HWP 101
Wallplate Transmitter, and selected device features. Topics in this section include:
•
•
•
About this Guide
This guide contains procedures for installation, operation, and control of the
XTP T HWP 101 Wallplate Transmitter as well as reference information. In this guide, the
terms "XTP T HWP 101" and "transmitter" are used interchangeably to refer to all models of
the XTP T HWP 101 Wallplate Transmitter.
About the XTP T HWP 101
The Extron XTP T HWP 101 is a single gang Decora
HDMI with embedded audio up to 330 feet (100 meters) over a single shielded twisted pair
cable. The one-gang form factor provides maximum efficiency and convenient installation
in wall mount, floor box, and furniture mount designs. The transmitter is HDCP compliant
and supports computer video to 1920x1200, including 1080p/60 Deep Color and 2K
resolutions. It offers many of the integrator-friendly features that are standard with XTP
products, such as EDID Minder and remote power capability. The single-gang
XTP T HWP 101 works with XTP Systems for signal distribution and long-distance
transmission in wall-mount environments.
The XTP T HWP 101 can be powered locally or remotely through an Extron Power Injector
or XTP matrix switcher (see
To configure and control the XTP T HWP 101, connect a host device, such as a computer,
to the USB Config port and enter Simple Instruction Set (SIS) commands (see
Configuration and Control
(see
About this Guide
About the XTP T HWP 101
Key Features
Power Connection
on page 18) or use the XTP System Configuration Software
XTP System Configuration Software
-style wallplate transmitter for sending
®
on page 13).
on page 21).
XTP T HWP 101 Wallplate Transmitter • Introduction
SIS
1
Advertisement
Table of Contents
