Insert another MPU into member switch 2 and use it as the standby MPU of member switch 2.
4.
Copy the configuration file a.cfg on the active MPU of member switch 2 to the standby MPU, and
5.
set the file as the startup configuration file to be used at the next startup.
Modify the member ID of the standby MPU on member switch 2 to make it consistent with that of
6.
member switch 1.
Unplug the corrupted MPU on member switch 1, and insert the standby MPU of member switch 2
7.
into member switch 1.
Configure IRF ports on member switch 1, and connect member switch 1 to member switch 2
8.
through physical IRF ports.
The fast recovery is completed.
To modify the member ID of the standby MPU:
To do...
Modify the member ID of the
standby MPU in user view
Displaying and maintaining an IRF fabric
To do...
Display information about the IRF
fabric
Display
topology
about the IRF fabric
Display
configurations that take effect after
device reboots
Display configuration information
about MAD detection
Display restricted ports
NOTE:
A restricted port in the system does not receive or forward multicast packets.
IRF fabric configuration examples
Use the command...
In IRF mode:
set
slot-number member-id member-id
In standalone mode:
set
member-id
Use the command...
display irf [ | { begin | exclude |
include } regular-expression ]
display irf topology [ | { begin |
information
exclude
regular-expression ]
all
members'
display irf configuration [ | { begin
|
regular-expression ]
display mad [ verbose ] [ | { begin
|
regular-expression ]
display restricted port [ chassis
chassis-number slot
slot-number ] [ | { begin | exclude
| include } regular-expression ]
irf
chassis
chassis-number
irf
slot
slot-number
|
include
exclude
|
include
exclude
|
include
34
Remarks
This command is applicable
slot
to the fast recovery of the IRF
only.
If
command in other cases,
unknown errors may occur.
member-id
Use it with caution.
Remarks
Available in any view
}
Available in any view
}
Available in any view
}
Available in any view
Available in any view
A restricted port does not receive
or forward multicast packets.
you
use
this