Displaying And Maintaining An Irf Fabric - H3C S5830V2 Configuration Manual

Figure 13 Active IRF fabric fails before the IRF link is recovered
To manually recover an inactive IRF fabric:
Step
1. Enter system view.
2. Recover the inactive IRF fabric.
After the IRF fabric is recovered, all ports that have been shut down by MAD come up automatically.

Displaying and maintaining an IRF fabric

Execute display commands in any view.
Task
Display information about all IRF
members.
Display the IRF fabric topology.
Display IRF link information.
Display IRF configuration.
Command
system-view
mad restore
Command
display irf
display irf topology
display irf link
display irf configuration
33