Figure 18 Network diagram
Configuration considerations
Disconnect IRF connections. Unplug cables for the IRF connections or shut down all physical IRF
•
ports on the master at the CLI. This example uses the latter method.
After the IRF is partitioned, switch the operating mode of the two switches from IRF to standalone
•
respectively.
Configuration procedure
Find out the master.
1.
<IRF> display irf
Switch
Slot
*+1
0
1
1
2
0
2
1
--------------------------------------------------
* indicates the device is the master.
+ indicates the device through which the user logs in.
The Bridge MAC of the IRF is: 000f-e26a-58ed
Auto upgrade
Mac persistent
Domain ID
The output shows that Device A is the master.
Disconnect IRF connections: disable the physical IRF port Ten-Gigabitethernet 1/3/0/1 on the
2.
master at the CLI. (In this example, there is only one IRF physical link.)
<IRF> system-view
[IRF] interface ten-gigabitethernet 1/3/0/1
[IRF-Ten-Gigabitethernet1/3/0/1] shutdown
[IRF-Ten-Gigabitethernet1/3/0/1] quit
Role
Priority
CPU-Mac
Master
1
00e0-fc0a-15e0
Slave
1
00e0-fc0f-8c02
Slave
1
00e0-fc0f-15e1
Slave
1
00e0-fc0f-15e2
: no
: always
: 0
Description
DeviceA
DeviceA
DeviceB
DeviceB
44