H3C S9500E Series Configuration Manual page 44
Routing switches irf configuration guide
Hide thumbs
Also See for S9500E Series:
- Configuration manual (459 pages) ,
- Command reference manual (225 pages) ,
- Security configuration manual (207 pages)
Table of Contents
Advertisement
The device will switch to IRF mode and reboot. You are recommended to save the current
running configuration and specify the configuration file for the next startup. Continue?
[Y/N]:y
Do
you
want
to
flash:/startup.cfg to make it available in IRF mode? [Y/N]:y
Please wait...
Saving the converted configuration file to the main board succeeded.
Slot 1:
Saving the converted configuration file succeeded.
Now rebooting, please wait...
Device A reboots automatically to switch its operating mode.
# Create IRF port 1/2 and bind it with the physical IRF port Ten-GigabitEthernet 1/3/0/1.
<Sysname> system-view
[Sysname] irf-port 1/2
[Sysname-irf-port 1/2] port group interface Ten-Gigabitethernet 1/3/0/1
[Sysname-irf-port 1/2] save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/cfa0555.cfg]
(To leave the existing filename unchanged, press the enter key):
flash:/cfa0555.cfg exists, overwrite? [Y/N]:y
Validating file. Please wait.....................................
The current configuration is saved to the active main board successfully.
Configuration is saved to device successfully.
Configure Device B
2.
# Change the operating mode of Device B to IRF.
<Sysname> system-view
[Sysname] irf member 2
Info: Member ID change will take effect after the switch reboots and operates in IRF mode.
[Sysname] chassis convert mode irf
The device will switch to IRF mode and reboot. You are recommended to save the current
running configuration and specify the configuration file for the next startup. Continue?
[Y/N]:y
Do
you
want
to
flash:/startup.cfg to make it available in IRF mode? [Y/N]:y
Please wait...
Saving the converted configuration file to the main board succeeded.
Slot 1:
Saving the converted configuration file succeeded.
Now rebooting, please wait...
Device B reboots automatically to switch its operating mode.
# Create IRF port 2/1 and bind it with the physical IRF port Ten-GigabitEthernet 2/3/0/1.
<Sysname> system-view
[Sysname] irf-port 2/1
[Sysname-irf-port 2/1] port group interface Ten-Gigabitethernet 2/3/0/1
[Sysname-irf-port 2/1] save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/cfa0666.cfg]
convert
the
content
convert
the
content
36
of
the
next
startup
of
the
next
startup
configuration
file
configuration
file
Advertisement
Table of Contents
