PSC Universal Keyboard Wedge Programming Manual page 57

Programming Sequence - continued
4. Phase C -- Define the OUTPUT FORMAT.
Scan the bar codes to select options for
each of the following parameters:
- Divide the input message into fields (1-5)
- Define the fields
- Add (or not) 1 or 2 fixed fields
- Set the number of fields to be transmitted
- Cancel (or not) fields
- Adjust the position of each field in the
output message.
5. Phase D -- Scan the END OF CON-
STRUCTION bar code corresponding to
the format number #N (Format #1-4
selected in Phase A). If you would like to
define a second format, start again at
Phase A and select a second format
number to program. Up to four formats
can be defined.
R44-2021
EDITING MODE
51