Wyse Timeout - PSC Universal Keyboard Wedge Programming Manual

Universal KBW Interface Configuration
To enable the WYSE timeout, follow these instruc-
tions:
1. Scan this ACCESS WYSE TIMEOUT bar
code.
2. Scan the digit bar codes from the Nu-
meric Pad in Appendix B to enter the
desired timeout value.
To use the Numeric Pad, your scan-
ner must be programmed to read
single-digit Code 39 bar codes. Fol-
low the instructions at the beginning
of Appendix B to program this function.
44
Universal Keyboard Wedge Programming Guide

WYSE Timeout

ACCESS WYSE TIMEOUT
IMPORTANT