Wand Emulation Activation - PSC Universal Keyboard Wedge Programming Manual

WAND EMULATION I/F CONFIGURATION

Wand Emulation Activation

To enable the Wand Emulation interface, first scan
this bar code...
ENABLE [Universal Wedge] WAND EMULATION
...then select the symbology to be emulated using
the bar codes in the Terminal/Keyboard Pad on
pages 28-32.
• Code 39 emulation is ID #69 (scan 6, then 9)
• I 2 of 5 emulation is ID #68
• UPC/EAN emulation is ID #70 (only 8 or 13
character messages are accepted for this
emulation.)
156
Universal Keyboard Wedge Programming Guide