PSC Universal Keyboard Wedge Programming Manual page 27

PC Down/UpLoad Mode - continued
PC Down/UpLoad Mode can also be a very useful
tool to quickly program a quantity of scanners
with the same configuration. This process takes
only a few seconds per scanner.
To install and use Down/UpLoad Mode:
1. Connect an approved AC adapter to the
scanner.
2. Connect the scanner to COM 1 or COM 2 of
your PC using PSC cable, P/N: 6015-0486.
3. Power-on on your PC and the scanner.
4. Copy the Down/UpLoad software from
the floppy disk to your PC hard disk.
5. Use the mouse or keyboard to select the
function desired and follow the instruc-
tions appearing on the screen.
R44-2021
COMMUNICATION MODES
21