Rs-232: Intercharacter Delay - PSC Universal Keyboard Wedge Programming Manual

RS-232 INTERFACE CONFIGURATION

RS-232: Intercharacter Delay

In a case that errors are detected using high speed
transmissions, a delay can be inserted between
each character for better synchronization. Scan the
bar code from this and the following pages to
select the desired pause (if any) between each
character before it is sent to the host. This time
delay is used to control the flow of data from the
scanner, but it should not be required for most
applications.
INTERCHARACTER DELAY = 0 ms
(RS-232 DEFAULT)
144
Universal Keyboard Wedge Programming Guide