PSC Universal Keyboard Wedge Programming Manual page 22

COMMUNICATION MODES
Keyboard
3. Plug the male keyboard connection end
of the 'Y' cable into the keyboard input
port of the computer/host terminal.
4. Plug the remaining end of the cable into
the scanner.
5. Power on the computer/host terminal.
6. Power on the scanner. A power-up beep
or a sequence of beeps (depending upon
the scanner type) will be emitted.
16
Universal Keyboard Wedge Programming Guide
Computer
or Host Terminal
Figure 1. Connecting the 'Y' Cable
'Y' Cable
S
C
A
N
N
E
R