PSC Universal Keyboard Wedge Programming Manual page 393

Your scanner must be enabled to read the Code 39
(C39) symbology in order to read the program-
ming bar codes in this manual.
To enable C39, follow these steps:
1. On the following pages, find the Enable
Code 39 feature for your scanner model.
2. Scan the SET/END (CODE 39 ONLY) bar
code for your scanner model from that
page.
3. Scan the ENABLE CODE 39 bar code for
your scanner model.
4. Scan the SET/END (CODE 39 ONLY) bar
code for your scanner model.
5. Your scanner should now be able to read
Code 39 bar codes.
R44-2021
Enabling Code 39
APPENDIX F
Appendix F
F-1