PSC Universal Keyboard Wedge Programming Manual page 284

APPENDIX B
Set Code 39 Minimum Length
To allow the indicated scanner models to read
single-digit bar codes...
• Scan the SET C39 MINIMUM LENGTH
bar code on the next page.
• Scan the C39 MINIMUM LENGTH = ONE
bar code.
• Scan the END C39 MINIMUM LENGTH bar
code on the second page following this page.
Reset Code 39 Minimum Length
After you've completed programming all scanner
features that required you to read single-digit bar
codes, you may want to reset the scanner with a
two-digit minimum length for Code 39 bar codes.
• Scan the SET C39 MINIMUM LENGTH
bar code on the next page.
• Scan the C39 MINIMUM LENGTH =
TWO bar code on the second page
following this page.
• Scan the END C39 MINIMUM LENGTH bar
code on the second page following this page.
B-2
Universal Keyboard Wedge Programming Guide