Symbologies - PSC Universal Keyboard Wedge Programming Manual

Symbology selection (bar code type) determines
which symbologies the scanner will decode. Once
you have determined the symbologies you wish to
enable, turn to the following pages, enable those
symbologies and set the data format options (e.g.
check digit, start/stop characters, etc.) required by
your host system for each symbology type. You
must enable the symbology format options
settings that are compatible with your host
system.
If your scanner does not support
symbology selection, only the fac-
tory default symbologies pre-set with
standard industry requirements will
be available. Contact your dealer if
you are unsure about your scanner's
default settings.
Be sure to test the scanner using factory settings
before making any changes.
R44-2021

SYMBOLOGIES

Symbologies
NOTE
161