How To Use The Standard Mounting Components; Standard Mounting Components Features And Characteristics - Pioneer PDP-425CMX Technical Manual

How to use the standard mounting components

4.1 Standard Mounting Components Features and Characteristics

In addition to reliability and the vivid display resulting from its large screen area, brightness, and image quality, the
plasma display (PDP-425CMX/PDP-42MXE10) is thin and lightweight, enabling mounting in locations not possible for
conventional displays.
We considered various mounting patterns and operating conditions during the design of the plasma display (PDP-
425CMX/PDP-42MXE10). A wide range of standard mounting hardware is available for easy mounting.
¶ Video Card: PDA-5003/PDA-5004
The video card makes video input and analog RGB input possible.
This product has a total of three lines: a COMPOSITE 1 line, S INPUT 1 line, and an analog RGB INPUT or COMPONENT
INPUT 1 line. Furthermore, it can handle 3-line or 2-line audio, thus increasing the uses for video presentations.
¶ Table Top Stand: PDK-TS01
This on-board support designed for the plasma display enables vertical placement of the unit.
¶ Tilt Mount Unit: PDK-5011
Permits tilting of the display downward from the horizontal by up to 25 degrees. Mount depth is 143 mm or less (in
vertical position, without optional speaker). This hardware permits a wide range of viewing angles.
¶ Wall Mount Unit: PDK-WM01
Distance from the rear surface of the plasma display to the wall is 32 mm.
It is provided with many installation holes for various hypothetical walls and it is constructed so that it can be easily
attached to the main unit.
¶ Plasma Display Ceiling Suspension Hardware: PDK-5012
Simple rod-type mounting hardware permitting display panning over a range of 45 degrees, and up to 25-degree
downward tilting from the horizontal. This hardware enables installation of the unit in a wide range of locations.
¶ Mobile Cart: PDK-5014
This is an extremely stable movable stand that one person can use to freely move the plasma display.
It can also be used to adjust the screen height and the screen angle of tilt to match the line of sight according to its
use.
¶ Speaker System: PDP-S44-LR
2-way speaker units featuring 5 cm (2 in.) tweeter and 8 cm (3-3/16 in.) woofer in vertical arrangement.
48