Pioneer PDP-425CMX Technical Manual page 130

Menu Mode
6 Use the [2/3] buttons to adjust the click frequency.
In step 4, the left side was aligned, and here the right
side is aligned.
1. With the [3] button, move the display until the mask
(black portion) protrudes into the right side of the image.
2. With the [2] button, move the display to the point
where the mask on the right side disappears.
7 In the adjustment in steps 5 and 6, left side of the screen moves, so with 'POSITION', accurately adjust the left
side of the video display again.
As in step 4, used the [2/3] buttons to align the left side.
8 In the adjustment in step 7, the right side of the screen moves, so with 'CLOCK', adjust the right side again.
As in step 6, use the [2/3] buttons to align the left side.
Repeat steps 7 and 8 until the adjustment value converges, then adjust the 'PHASE'.
There are vertical lines, so adjustment becomes easier if a signal having edges that are easy to check is input.
9 Place the cursor on 'PHASE', and press the [SET] button.
0 Using the [2/3], adjust the clock phase.
Move the vertical edge of the image to the point where it becomes bold.
Adjustment is now complete.
130
Screen 6
C L O C K
SET SET
0
:
MENU EXIT