Pioneer PDP-425CMX Technical Manual page 93

2) Connecting the cords
Turn off the power of all connected units before
connecting the cords.
Connect the display's SPEAKER R and L terminals with
the speakers' terminals using the included connection
cords.
Cord Clamper
Peel off the protective tape from the back of
the clamper, then mount the clamper in the
desired position and clamp the cords together.
There is polarity ª · with the conductor of each
connection cord.
Connect each conductor to the correct terminal.
While holding the button of each speaker terminal,
insert a conductor of the connection cord.
Speaker System: PDP-S44-LR
3) Care and Maintenance
When the cabinet gets dirty...
• Wipe with a lit-free, soft, dry cloth.
If the cabinet is seriously stained, soak a cloth in a neutral
detergent solution, wring well and, afer wiping, remove
moisture by wiping with a dry colth.
If you want to use a chemical cloth for cleaning, read
well the caution provided with the chemical cloth
product.
• Do not use solvent such as thinner or benzine for
cleaning. Otherwise the surface finish will be
deteriorated or the coating will be stripped off.
• To remove dust from the speaker nets, use a brush
adapter of a cleaner. Avoid applying the cleaner inlet
directly without using a brush adapter or using a nozzle
adapter.
• To prevent damage to the cabinet and speaker nets, do
not scrach or hit them with a fingernail or other hard
object. Also do not stab the speaker nets with a sharp
object to prevent marking a hole.
Do not apply volatile agent such as insecticide on the
cabinet or leave a rubber or vinyl product in prolonged
contact with it. Otherwise the surface finish will be
deteriorated or the coating may be stripped off.
93