List Of Rs-232C Commands - Pioneer PDP-425CMX Technical Manual

For pioneer plasma display monitor when used with video cards (expansion solutions cards)
Hide thumbs Also See for PDP-425CMX:
Table of Contents

Advertisement

5.5.5 List of RS-232C Commands

Command
AMNS00
Turns off voice mute.
AMYS01
Turns on voice mute.
AST
Executes auto setup.
BHI***
Adjusts B HIGH.
BLW***
Adjusts B LOW.
BRAS01
Sets the UART setting to 232C (1200 BPS).
BRAS02
Sets the UART setting to 232C (2400 BPS).
BRAS03
Sets the UART setting to 232C (4800 BPS).
BRAS04
Sets the UART setting to 232C (9600 BPS).
BRAS05
Sets the UART setting to 232C (19200 BPS).
BRAS06
Sets the UART setting to 232C (38400 BPS).
BRA
Displays the present baud rate.
BRT***
Adjusts the brightness.
BSL***
Adjusts the side mask BLUE.
CFR***
Adjusts the CLOCK (PLL frequency).
CGB***
Adjusts color detail blue.
CGC***
Adjusts color detail cyan.
CGG***
Adjusts color detail green.
CGM***
Adjusts color detail magenta.
CGR***
Adjusts color detail red.
CGY***
Adjusts color detail yellow.
CLMS00
Sets the color mode to normal.
CLMS01
Sets the color mode to studio.
CLSS01
Sets the color system to AUTO.
CLSS02
Sets the color system to NTSC.
CLSS03
Sets the color system to PAL.
CLSS04
Sets the color system to SECAM.
CLSS05
Sets the color system to 4.43NTSC.
CLSS06
Sets the color system to PAL M.
CLSS07
Sets the color system to PAL N.
CLS
Displays the present color system.
CNT***
Adjusts the contrast.
COFS00
Doesn't set color off.
COFS01
Sets color off.
COF
Displays the present color off setting.
COL***
Adjusts the color.
CPH***
Adjusts the PHASE (PLL phase).
CTPS01
Sets the color temperature to LOW.
CTPS02
Sets the color temperature to MID LOW.
CTPS03
Sets the color temperature to MIDDLE.
CTPS04
Sets the color temperature to MID HIGH.
CTPS05
Sets the color temperature to HIGH.
CTP
Displays the present color temperature.
CTRS00
Turns off CTI.
CTRS01
Turns on CTI.
CTR
Displays the present CTI set value.
DBLS01
Sets the DVI black level to LOW.
DBLS02
Sets the DVI black level to HIGH.
DNRS00
Turns off digital NR.
DNRS01
Sets digital NR to low.
DNRS02
Sets digital NR to middle.
DNRS03
Sets digital NR to high.
DNR
Displays the present DNR set value.
DOF
Erases the OSD display that is now displayed.
DPR
Resets the still picture linking function.
Function
Command
DSGS01
Sets the DVI connection signal to PC.
DSGS02
Sets the DVI connection signal to STB/DVD.
DW0
Lowers the adjustment value by 10.
DWF
Minimizes the adjustment value.
DWn
Lowers the adjustment value by n. (n = 1 to 9)
ENH***
Adjusts the horizontal enhance.
ENV***
Adjusts the vertical enhance.
ESVS00
MR: Sets the power saving setting to standard.
MD: Sets the power saving setting to normal (4L).
ESVS01
MR: Sets the power saving setting to power saving.
MD: Sets the power saving setting to normal (2L).
ESVS02
MR: Sets the power saving setting to fixed brightness.
MD: Sets the power saving setting to energy saving (2L).
ESVS03
Sets the power saving setting to mode 3 (long life).
ESVS04
Sets the power saving setting to auto.
ESV
Displays the present power saving setting.
FCLS00
Releases the functional lock.
FCLS01
Prevents operation of main display buttons.
FCLS02
Prevents operation of the remote control buttons.
FCLS03
Prevents the operation of the main display/remote control
buttons.
FCLS04
Sets the memory lock.
FCL
Displays the present setting of the functional lock.
FDT
Executes FUNCTION DEFAULT.
FMKS00
Turns off the screen mask.
FMKS02
Turns on inverse (negative - positive reversal).
FMKS03
Turns on the white mask.
FMKS04
Turns on the red mask.
FMKS05
Turns on the green mask.
FMKS06
Turns on the blue mask.
FMKS07
Turns on the yellow mask.
FMK
Displays the present setting of the screen mask.
FRCS01
Turns on (normal) the FRC.
FRCS02
Turns off the FRC.
FRC
Displays the present FRC setting.
FRP
Initializes the various adjustment values of the integrator/
SCREEN.
GHI***
Adjusts G.HIGH.
GLW***
Adjusts G.LOW.
GRAS01
Sets gradation "GAMMA 2.0".
GRAS02
Sets gradation "GAMMA 1.8".
GRAS03
Sets gradation "GAMMA 2.2".
GRAS04
Sets gradation "DRE MID".
GRAS05
Sets gradation "DRE HIGH".
GRAS06
Sets gradation "DRE LOW".
GRAS07
Sets gradation "HIGH CONTRAST".
GRA
Displays the present gradation setting.
GSL***
Side mask GREEN adjustment
HPS***
Adjusts the horizontal position.
HSI***
Adjusts H.SIZE.
IDA
Executes the AUTO ID setting.
IDC
Clears the ID.
IDS***
Sets the ID.
INPS01
Switches the main screen to INPUT1.
INPS02
Switches the main screen to INPUT2.
RS-232C Adjustment
Function
177

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pdp-42mxe10

Table of Contents