Screen (Screen Position) Adjustment - Pioneer PDP-425CMX Technical Manual

Integrator Mode

5) SCREEN (Screen Position) Adjustment

The items that are adjusted here are H. POSITION, V. POSITION, CLOCK, PHASE, H. SIZE and V. SIZE.
1 Enter the integrator mode and switch to the input (INPUT1
to INPUT5) to be adjusted.
Select 'SCREEN', and select the item to adjust.
In screen 1, when 'YES' is selected for the 'SCREEN
DEFAULT', it is possible to return all of the SCREEN
adjustment valued to the factory settings.
2 Perform the adjustment.
Note
'CLOCK' and 'PHASE' can be adjusted when there is PC
signal input.
The item to be adjusted can be switch by using the [5/∞]
buttons on the remote control or main-control panel.
Adjustment is performed using the [2/3] buttons on the
remote control or main-control panel.
It is possible to move to a different item by using the [5/
∞] buttons.
The values adjusted here become the initial values for adjustment in the menu mode.
Pressing the [SET] button returns to screen 1.
<Adjustable Range>
H. POSITION, V. POSITION when there is PC signal input: 0 to 255 (initial value: 128)
H. POSITION, V. POSITION when there is video signal input: 0 to 127 (initial value: 64)
H. SIZE, V. SIZE: 0 to 63 (initial value: 0)
CLOCK: 0 to 255 (initial value: 128)
PHASE: 0 to 31 (initial value: 16)
<Adjustment Order>
Performing adjustment in the following order is effective.
V. POSITION H. POSITION
140
CLOCK H. POSITION
Screen 1
I N T E G R AT O R
P I C T U R E S C R E E N
H . P O S I T O I N
V . P O S I T O I N
C L O C K
P H A S E
H . S I Z E
V . S I Z E
S C R E E N R E S E T
ENTER
SET
Screen 2
H . P O S I T I O N
SET
SET
CLOCK PHASE
I N P U T 1
S E T U P O P T I O N
: 1 2 8
: 1 2 8
: 1 2 8
: 1 6
: 3 2
: 3 2
EXIT
MENU
:
1 2 8
EXIT
MENU