Charging Method - Mitsubishi Electric G-50A Technical Manual

8.6 Charging Method

As shown below, the charging in this system can be set as follows. Divide the time frame 0:00 ~ 24:00 into
10 charging frames, and assign 5 charging unit prices to each charging frame respectively for setting.
Please note that each setting is common within the system.
0:00
Closing time
example
A-company
B-company
C-company
TG-2000A setting example
Charging time
frame setting
Unit price
setting
As the above setting can be made for each weekday individually, the unit price specified for holiday can be employed.
In the case of electric power count by PC direct connect (RS-485WHM), charging unit (daytime, nighttime,
weekday, weekend and seasons) can be set up. Setting will be different from Figure 8-15.
1
Charging can not be made without this setting.
6:00
Outside time frame
Outside time frame
Charging frame 1
Unit price setting example
Unit price 2
Figure 8-15 Setting example of charging time frame and unit price
12:0
Inside time frame
Inside time frame
Inside time frame (24-hour operation)
2 Charging frame 3
Unit price 1 (Inside basic time frame): 8:00~18:00
Unit price 2 (Inside basic time frame): 18:00~8:00
Unit price 3 (Operation inside/outside basic time frame) = 70 yen
Unit price 4 (Holiday)
3
Unit price 1
18:0 24:0
Outside time frame
Outside time frame
4 Charging frame 5
= 100 yen
= 50 yen
= 60 yen
3
Unit price 2
59