Mitsubishi Electric G-50A Technical Manual page 42

Setting unit
Selects the setting unit.
Block name
Selects the block to be set.
Group name
Selects the group to be set.
Group number
Selects the group to be set.
Undo button
Returns any changes to
the original contents.
Setting unit
Selects the setting unit.
Block name
Selects the block to be set.
Group name
Selects the group to be set.
Group number
Selects the group to be set.
Undo button
Returns any changes to
the original contents.
38
The settings of the operation contents are
performed by setting unit (group, block, all
blocks) as displayed in the screen on the left. The
setting of the operation can be set up to 12 sets
each day.
Figure 7-2 Weekly schedule set screen
Figure 7-3 Annual schedule set screen
Day of the week selection
Selects the day of the week
for the schedule to be set.
Save/do not save
Sets saving or not saving when
pushing the settings save button.
Schedule contents
Displays the schedule contents.
Selection button
Sets the schedule contents.
Delete button
Deletes the contents of the schedule.
Settings save button
Saves the schedule contents. Settings
are not saved if this button is not pressed.
Pattern selection
Selects the pattern to set the schedule.
Save/do not save
Sets saving or not saving the schedule
pattern when pushing the settings save
button.
Schedule contents
Displays the schedule contents.
Selection button
Sets the schedule contents.
Delete button
Deletes the contents of the schedule.
Save/do not save
Sets saving or not saving the pattern
assigned to a certain day when pushing
the settings save button.
Calendar button
Assigns the pattern to a specific day
Settings save button
Saves the schedule contents. Settings
are not saved if this button is not pressed.