Setting Of Abnormal Mail Transmission System - Mitsubishi Electric G-50A Technical Manual

13.4 Setting of Abnormal Mail Transmission System

As an abnormal mail is transmitted by E-mail, it is necessary to contract with your internet service provider.
The abnormal mail transmission system is available by setting information such as the mail address and ID
for connecting to the Internet, which are obtained from the provider, to G-50A and a dialup router.
The components shown in Table 13-9 are necessary to use the function of abnormal mail transmission.
In addition, the initial setting of the function can be set only from the initial setting tool.
Name of object: Mitsubishi
Electric (000001)
Date and time of origination:
July 25, 2002 05:41:41
Place of generation of
mail: 059
Abnormal mail code: 1291
State: Generated
Internet
provider
Table 13-9 Necessary components for abnormal mail transmission system
Names of components
Hub for 10BASE-T
10BASE-T LAN straight cable
(twist pair cable)
Dialup router
Data/Fax modem card
Abnormal mail transmission
license
90
Dialup
router
Public telephone circuit
Figure 13-6 Chart of abnormal mail transmission system
Refer to Table 13-4.
This component is necessary, when the number of G-50A and that of PC to be connected are over the
number of dialup-router-built-in hub ports, and when wiring distance is expanded.
Refer to Table 13-4.
This is required to connect the mail server of an internet provider.
ISDN line is available. In case of using analog line and PHS line, connect a piece of PC card below to
the dialup router.
This is necessary in case of using analog line.
Requires for each G-50A.
G-50A
PC for centralized control
Remarks
Failure
Local
site
branch