Storing And Recalling Data; Storing/Recalling Calibration To/From The Fusion Unit - Digital Projection FUSION User Manual

10 Storing and recalling data

The FUSION processor system has powerful and flexible features for storing and recalling
calibration data. When a calibration is stored, the user can recall all calibration parameters at
any given time or on any given control PC. Calibration can be stored:
• In the multi image processor unit
• On the control PC. This is a copy of the data stored in the multi image processor unit
• Both
When a calibration has been completed, the calibration must be accepted in the menu.
Accepting a calibration means the binary data is stored in the unit and will be used
automatically when the unit is powered on.

10.1 Storing/recalling calibration to/from the FUSION unit

When storing calibration to the FUSION unit, it will be saved in the internal memory of the
unit. Should the multi image processor unit or the control PC lose power during calibration,
the data can easily be recalled. To save the calibration to the multi image processor unit click
"Save Calibration" in the Calibration view toolbar, press Ctrl+S or select "Save Calibration"
from the file menu (Figure 10-1). Any calibration already stored in the multi image processor
unit will be overwritten.
Figure 10-1. Save current calibration to the FUSION unit
If you want to recall your last saved calibration, click "Load Calibration" in the Calibration view
toolbar (Figure 5-11).
49