System Requirements - Digital Projection FUSION User Manual

Fusion

Table of Contents

4 Installation and setup

The following section outlines the general requirements to supporting equipment in order

to run the FusionNet Calibrator and successfully setting up a multi image based projection

system.

4.1 System requirements

FusionNet 2.0 – required to set up and operate multi image processing system processors,

works with Microsoft Windows® operating systems only. The following versions are sup-

ported:

• Windows XP (32-bit only), SP xx or

• Windows Vista (32- or 64-bit)

• Windows 7 (32- or 64-bit)

In addition, Microsoft .NET Framework 3.5 or later must be installed.

Any standard computer capable of running the above operating systems should work, but for

best performance, the computer running FusionNet 2.0 should have at least:

• Intel® Dual Core™ architecture or similar.

• 2 GB of RAM

• 200 MB of free disk space

• 1.0 Gigabit Ethernet interface

Note! For the FusionNet application to be displayed correctly, 96 Digital Projection must be

used (Windows Default).

Table of Contents

Do you have a question about the FUSION and is the answer not in the manual?