Fine Tuning Control Points; Real Time Warp - Digital Projection FUSION User Manual

6.7 Fine tuning control points

6.8 Real Time Warp

33
Figure 6-6. Working with Mesh Bezier, simple mapping
To fine tune the position of a warping control point, first click on the control point.
Then press and hold Ctrl while using the arrow keys on the keyboard to move the control
point.
Real Time Warp state can be turned off and on in the Calibration View Toolbar, see Figure
6-7. When Real Time Warp state is Off, the grid will be on display and in the user interface.
When Real Time Warp is On, the image from the IG will be shown on the display, while the
grid is shown in the user interface.
Figure 6-7. Real time warp state