Making Calls - Basic Functions; Answering Calls; Answering A Call With The Handset; Answering A Call With The Speaker (Speakerphone Mode) - Siemens HiPath 2000 Operating Instructions Manual

Step by Step
Speaker
Making Calls – Basic Functions

Answering Calls

Special default ring signaling is set for your telephone:
• When you receive an internal call, your telephone
rings once every four seconds (single-tone sequence).
• When you receive an external call, your telephone
rings twice in rapid succession every four seconds
(dual-tone sequence).
• When you receive a call from the entrance telephone,
your telephone rings three times in rapid succession
every four seconds (triple-tone sequence).
• If a call is waiting, you hear a short tone (beep) every
six seconds.
Your service personnel can adjust the ring ca-
dence for external and internal calls for you. In
other words, different ring cadences can be set
for different internal callers.
The number or the name of the caller appears on the
display.

Answering a Call With the Handset

The telephone rings. The caller appears on the screen.
n
Lift the handset.
u v
or Raise or lower the volume. Keep pressing the key until
the desired volume is set.
Answering a Call with the Speaker
(Speakerphone Mode)
The telephone rings. The caller appears on the screen.
Press the key. The LED lights up.
Speakerphone mode.
u v
or
Raise or lower the volume. Keep pressing the key until
the desired volume is set.
Making Calls – Basic Functions
15