Changing Key Labels - Siemens HiPath 2000 Operating Instructions Manual

Changing Key Labels

Step by Step
Program/Service
>
*
91=Prog. feature key?
>
Key label?
Change?
>
US: Default Label?
>
UK: Reset label
US: Save?
UK: Save entry?
>
Previous?
US: Exit?
UK: End?
120
Changing Key Labels
When assigning function keys, you can modify the de-
fault labels to meet your needs, or change an already
modified label back to the default label.
You have the opportunity to change key labels when you
assign any of the following to a key:
• a station number! Page 29,
• a function ! Page 65 or
• a procedure ! Page 69.
Follow the steps for the respective procedure.
Change or reset the label for a previously assigned
key:
Press the key. The LED lights up.
:
Select and confirm.
or
qme
Enter the code.
Press the key whose label you want to modify/reset.
:
Select and confirm.
:
Confirm to enter your text, It will be displayed as a key
label.
For information about text entry, see ! Page 121.
or
:
Select and confirm to reset the label to the default.
:
:
Confirm to save the changes.
:
or
:
Select and confirm to cancel the changes.
:
Confirm.
: