Table of Contents
Advertisement
Residual heat indicator
o After
o IMPORTANT: The residual heat indicator will disappear if your
mains supply is cut.
Booster function
The back right cooking zone has a booster function, when this function
is selected, it increases the power output of that particular cooking
zone to 2600 watts.
o Press the ON/OFF button (8)
o The cooking zone indicators (3) will all read "-".
o Press the cooking zone selection button (2) for the
back right cooking zone and set your desired power
level using the plus (5) and minus (4) buttons.
o Press the booster button (1) and the back right
cooking zone will operate at its highest power level.
o The letter "P" will appear in the cooking zone
indicator (3) whilst the booster function is operating.
o After 5 minutes the booster function will cease and
the back right cooking zone will return to the power
level that you originally set. The letter "P" will be
replaced by the number of the power level in the
cooking zone indicator.
o If you use the front right cooking zone whilst the
booster function is being used, it will not heat above
power level 2.
a
cooking
corresponding cooking zone indicator (3) will show
a
flashing
letter
temperature of the cooking zone is over 60°C and
is therefore still high enough to cause injury.
15
zone
is
switched
"H".
This
means
off,
the
that
the
Advertisement
Table of Contents
