Switching on a dual circuit cooking zone
The dual circuit cooking zones have two cooking areas that you can
use, a central section and an outer section. You can use the central
section (A) independently or both sections (B) at once.
o Use the plus (4) or minus (3) buttons of the dual circuit cooking
o The central section of the duel circuit cooking zone will switch
o If you wish to also activate the outer section of a duel circuit
Switching off a dual circuit's outer section
o Both zones of the dual circuit most be switched on.
o Press the dual circuit ON/OFF button (8) and the outer section
Residual heat indicator
o When the temperature of the zone falls below 60°C, then the
o IMPORTANT: The residual heat indicator will disappear if the
o IT IS STILL POSSIBLE TO BURN YOURSELF ON A HOB
Downloaded from
www.Manualslib.com
zone that you wish to use and select a power level.
on.
zone, you should press the dual circuit ON/OFF button (8).
will switch off.
o After a zone is switched off, the corresponding
cooking zone indicator (2) will show a flashing
letter "H". This means that the temperature of the
zone is over 60°C and is therefore still high enough
to cause injury.
letter "H" will go out.
mains supply to the product is cut.
ZONE,
EVEN
WHEN
DROPPED BELOW 60°C.
manuals search engine
THE
TEMPERATURE
OF
IT
HAS
14