S
witching the hob off
Once you hav
e switched off all of the cooking zones, you should switch
th
e hob off.
Residual heat indicator
o After a zone is switched off, the corresponding
cooking zone indicator (3) will show a letter "H". This
means that the temperature of the zone is
and is therefore still high enough to cause injury.
o IMPORTANT: The r
mains supply is cut.
P
an sensor
E
ach zone has a sensor on it, so it can detect the presence of a pan.
o The sensor is fine-tuned to detect a pan being placed on it. The pan
should be one size smaller than the nominal diameter of the zone.
o If after placing a pan on a cooking zone and selecting that
cooking zone, a "U" shaped symbol appears on the cooking
zone indicator (3). This means that the pan is either the
incorrect size or shape. Or it could be made from
material that is inappropriate for use on an induction zone hob.
o If a cooking zone is selected but no pan is detected, the pan sensor
system will ch
eck for the presence of a pan approximately every
few seconds.
o You should check that your pans are suitable for use on an
induction zon
e hob (see the pan manufacturer's trademark or
instructions).
o Press the ON/OFF button (1).
o It is possible to turn the hob o
pressing the ON/OFF button.
esidual heat indicator will disappear if your
16
ff at any time by
over 55°C
a