Inspection Sheet - Acroprint ES700 Service Manual

9. INSPECTION SHEET

Inspection Item
Turn On •
Insert the AC Adapter Ass'y to the AC power outlet.
• Press the reset switch.
LCD Check • Press the SELECT and reset switch
simultaneously.
• Press the SET switch.
• Press the SET switch.
• Each pressing of the SET switch causes the LC
to glow in this following order.
PASSWORD
D.S.T.START
none
LEADING ZERO
YEAR DIGIT
DATE
• Repeated pressing of the SET switch causes
the display to change as follows.
0000
00
9999
99
• Press the SET switch.
Printing Check
• Set the knob on the bottom to the center and
print out three times.
• Press the SET and reset switch simultaneously.
• Print out three times.
• Press the reset switch.
Inspection Method
none D.S.T.END
PRINT DIRECTION
none LANGUAGE COMMENT
HOUR MIN.
PRINT ORDER HOUR
TIME ' AM PM
...........
1111 2222
11 22
• Make sure initial operation was made and the
display indicates the time at 12:00 a.m.
• Display shows "
Make sure readouts other than ** are identical.
• Make sure the entire LCD is lit up.
• Make sure the entire LCD is put out.
• " "(16 pieces), " ' ","AM","PM"," : ", "– " are
lit up in sequence.
: –
8888
88
• Make sure initial operation.
• Make sure the printed output is as follows.
Example) JAN 1
• Make sure initial operation, and display shows
" 0000".
00
• Make sure twenty "E" characters are printed
out.
• Make sure initial operation was made and the
display indicates the time at 12:00 a.m.
9-1
Inspection Standard
10-**".
7
12:00
AM