(11) Removing the Sensor Block, Sensor Lever, and Switch PCB Ass'y
1. Move the Sensor Block in the direction shown by arrow A and remove it from the Platen Cover while pulling it
upward.
2. Remove the Sensor Lever with tweezers
3. Release the hook part of the Sensor Block and remove the Switch PCB Ass'y.
Switch PCB Ass'y
P/N Q7150-5007A
(12) Removing the Stopper A, Reinforcing Plate, Paper Pressure Plate Ass'y, and Bottom Plate
1. Remove the Stopper A with tweezers.
2. Do not disassemble the Reinforcing Plate, Paper Pressure Plate Ass'y and Bottom Plate unless its removal is
necessary.
*Do not peel off the tapes adhering the Paper Pressure Plate Ass'y.
Reinforcing Plate
P/N Q7150-1054
Sensor Lever
P/N Q7150-1886
Stopper A
P/N Q7150-1234
Bottom Plate
P/N Q7150-1694
Sensor Block
P/N Q7150-1885
Paper Pressure Plate Ass'y
P/N Q7150-1067A
4-11
Platen Cover
P/N Q7150-1648
Reinforcing Plate
P/N Q7150-1054