Acroprint ES700 Service Manual page 17

(3) Removing the Platen Cover
1. Remove two screws c holding the Platen Cover and move the Sensor Block in the direction shown by arrow A
so as to slide the Platen Cover in the direction shown by arrow B for removal.
[Screw c : P.H.T. Screw (BT) 3x6 : 2 pieces]
*Carry out the procedure with the Platen Ass'y pressed downward. (Rotate the Cam Shaft to press down the
Platen Ass'y. As the Platen Ass'y moves just underneath, it will emit a click sound.)
(4) Removing the Platen Gear, Cam Gear, Mid Gear, Base Plate Ass'y, and Spacer.
1. Remove the Platen Gear, Cam Gear, Mid Gear.
2. Remove two screws c holding the Base Plate Ass'y.
[Screw c : P.H.T. Screw (BT) 3x6 : 2 pieces]
3. Remove the Spacer.
Base Plate Ass'y
P/N Q7150-1040A
B
c
4-6
c
A
Platen Cover
P/N Q7150-1648
Cam Gear
P/N Q0100-1554-1
Mid Gear
P/N Q0100-1137
Platen Gear
P/N Q7150-1082
Spacer
P/N Q7150-1387