Acroprint ES700 Service Manual page 18

(5) Removing the Bearing (this side), Guide Shaft, Carrier Ass'y, Carrier Spring,
Carrier Sub Plate, Ribbon Driving Wheel, Clutch Gear, and Ribbon Driving Shaft.
1. Remove one screw c holding the Bearing (this side).
[Screw c : P.H.T. Screw (BT) 3x6 : 1 piece]
2. Remove the Guide Shaft from the Base Plate Ass'y.
3. Remove the Carrier Ass'y from the Base Plate Ass'y.
4. Remove the Carrier Spring from the Carrier Ass'y.
5. Remove one screw d holding the Carrier Sub Plate.
[Screw d : P.H.T. Screw (BT) 3x6, PW : 1 piece]
6. Remove the Ribbon Driving Wheel, Clutch Gear, and Ribbon Driving Shaft.
Bearing
P/N Q0100-1035
Guide Shaft
c
P/N Q7150-1051
Base Plate Ass'y
P/N Q7150-1040A
Carrier Spring
P/N Q7000-1166-1
Carrier Ass'y
P/N Q7150-1160A
4-7
Carrier Sub Plate
P/N Q7000-1466
Clutch Gear
P/N Q7000-1548
Ribbon Driving Shaft
P/N Q7000-1674-1
Ribbon Driving Wheel
P/N Q7000-1673
d