Acroprint ES700 Service Manual page 19

(6) Removing the Lead Screw Shaft, Cam, Cam B, Tractor Shaft Spring, and Bearing
1. Pull out the Lead Screw Shaft from the Cam B
2. Remove the Cam, Cam B, and Tractor Shaft Spring.
3. Remove one screw c holding the Bearing.
[Screw c : P.H.T. Screw (BT) 3x6 : 1 piece]
Base Plate Ass'y
P/N Q7150-1040A
Cam
P/N Q0100-1576
(7) Removing the Sensor Harness B Unit
1. Remove one screw c and one screw r holding the Sensor Harness B Unit
[Screw c : P.H.T. Screw (BT) 3x6 : 1 piece]
[Screw r : P.H.T. Screw (BT) 3x8 : 1 piece]
Base Plate Ass'y
P/N Q7150-1040A
Tractor Shaft Spring
P/N 84950-1586
c
4-8
Lead Screw Shaft
P/N Q7000-1327
Cam B
P/N Q0100-3275
c
Bearing
P/N Q0100-1035
Sensor Harness B Unit
P/N Q7150-5165U
r