3-2. Tools Required
Tools required :
1. No. 2 or #2 Phillips screwdriver
2. Miniature screwdriver
3-3. Disassembly
Disassemble the parts in the following order :
(1) Top Enclosure
(2) Printer Cover
(3) Control PCB Ass'y
(4) LCD Panel
(5) Mechanism Block
(1) Removing the Top Enclosure
1. Unlock the Lock Lever and remove the Top Enclosure.
*If the Lock Lever cannot be used, the unit may be unlocked by using tweezer with rounded points to push
the two holes on the rear of the Top Enclosure.
Lock Lever
P/N Q7152-2084
Top Enclosure
P/N Q7152-2001
(1)
(1)—(2)
(1)—(2)—(3)
(1)—(2)—(3)—(4)
(1)—(2)—————–(5)
3-3