Stop Printing; Error Messages/Malfunctions - Microlife BP 3BU1-5 Instruction Manual

Wrist watch blood pressure monitor

Hide thumbs Also See for BP 3BU1-5:

Table of Contents

6.3. Stop printing

If you would like to stop printing, click the

PRINTER button during the printing process.

NOTE:

Further details regarding the printer can be found

in the printer instruction manual.

If an error occurs during a measurement, the mea-

surement is discontinued and a corresponding error

code is displayed (Example: Error No. 2).

Error No. Possible cause(s)

ERR 1

No pulse has been detected.

ERR 2

Unnatural pressure impulses inﬂuence the measurement

result. Reason: The arm was moved during the

Measurement (Artefact).

ERR 3

The inﬂation of the cuff takes too long. The cuff is not

correctly seated.

ERR 5

The measured readings indicated an unacceptable dif-

ference between systolic and diastolic pressures. Take

another reading following directions carefully. Contact

you doctor if you continue to get unusual readings.

ERR 6

Single data differ too much during Average Mode even

after 4 cycles. No average result can be displayed.

Table of Contents

Show Quick Links

Table of Contents