Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS
4.2
3.5'' Hard Disk Drive Support
®
The Intel
Server System P4308CP4MHEN and P4308CP4MHGC support 8x3.5'' drive
configuration. The drive bay can support either SATA or SAS hard disk drives. Mixing of drive
types within the hard drive bay is not supported. Hard disk drive type is dependent on the type
of host bus controller used, SATA only or SAS. Each 3.5'' hard disk drive is mounted to a drive
tray, allowing for hot swap extraction and insertion. Drive trays have a latching mechanism that
is used to extract and insert drives from the chassis, and lock the tray in place.
Light pipes integrated into the drive tray assembly direct light emitted from Amber drive status
and Green activity LEDs located next to each drive connector on the backplane, to the drive
tray faceplate, making them visible from the front of the system.
Amber Status LED
Green Activity LED
Amber
84
Figure 38. 3.5'' Hard Disk Drive Cage
Figure 39. 3.5'' Hard Disk Drive Support - LED Status
Table 96. 3.5'' Hard Disk Drive Status LED States
Off
No access and no fault
Solid
Hard Drive Fault has occurred
On
Blink
RAID rebuild in progress (1 Hz), Identify (2
Hz)
Intel order number G38159-001
Storage and Peripheral Drive Bays
Revision 1.0