System Power Sub-system
Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS
2.3.9
Firmware Update
The power supply shall have the capability to update its firmware from the PMBus interface
while it is in standby mode. This FW can be updated when in the system and in standby mode
and outside the system with power applied to the 12Vstby pins.
Refer to the CRPS Common Requirements Specification for detailed requirements.
2.4
Higer Current Power Common Redundant Power
Distribution Board (PDB)
®
®
The Power Distribution Board (PDB) for Intel
Server System P4000IP and Intel
Workstation
System P4000CR supports the Common Redundant power supply in a 1+1 redundant
configuration. The PDB is designed to plug directly to the output connector of the PS and it
contains 3 DC/DC power converters to produce other required voltages: +3.3VDC, +5VDC and
5V standby along with additional over current protection circuit for the 12V rails.
®
This power distribution board is intended to be used in the Intel
Server System P4000IP and
®
Intel
Workstation System P4000CR with various common redundant power supplies; 750W,
1200W, 1600W.
63
Revision 1.0
Intel order number G38159-001