Peel Off Mode - Avery Dennison AP 2.4 User Manual

Peel Off Mode

(Installing the dispenser kit, please refer to the Appendix
Follow the common procedure of "Loading the Media"of Standard
Mode from step 1 to step 8.
9. Remove approximately 6" long labels from the label backing
paper.
Peeler Sensor
Backing Paper
I )
19
10. Trim the edge of the label backing paper with scissor or knife.
11. Lead the backing paper over the dispenser bar, then thread it
back into the slot between the dispenser bar and H cover,
ensuring that it is inserted between white plastic roller and
platen roller.
Media Guides
Dispenser Bar
H Cover
20