Troubleshooting - Avery Dennison AP 2.4 User Manual

▀ Paper/Output
▀ (Speed)
Print quality
(Darkness)
Default Document menu
click "Advanced"
click each item to
select desired
parameter
click "OK"
▀ Create a new size
Please refer to the
procedure of create a
new size on Win 2000.
43

Troubleshooting

Normally, when the printer is in abnormal condition, the "POWER"
LED will keep blinking. The printing work and the communication
between the host and printer will stop.
To understand the problem, please check both
LEDs first:
A. Power and Ready LEDs blink at the same tempo
Power LED Ready LED
ON ON
OFF OFF
Possible Solutions
Problems
Miss-detect the gap . Check the label path
. Check the label sensor
Label stock out . Supply the label roll out
Label stock not . Install the label roll
installed
Label jam . Recover the jam
Remarks
If you are using
continuous label roll
and run under
Windows, you should
select the continuous
media.
44