Loading For Non-Peel Mode; Loading For Peel Mode - Avery Dennison Pathfinder 6057 Operator's Handbook Manual

Loading for Non-Peel Mode

1. Feed the supply over the platen roller, peel bar, and label deflector.
2. Close the supply cover.
3. Calibrate the supply. See "Calibrating the Supply" for more information.

Loading for Peel Mode

1. Peel and discard the first four inches of labels from the backing paper.
2. Hold the printer upright and gently push down on the label deflector.
3. Feed the backing paper over the peel bar and through the slot at the base of the label
deflector.
Platen Roller
(black rubber)
Peel Bar
(metal)
Platen Roller
(black rubber)
Label
Deflector
Peel Bar (metal)
Input Panel
Label Deflector
Usi ng Supplies 3-3