Normal Operation; Using The Envoy Lcd Menu - enphase Envoy Installation And Operation Manual

Communications gateway
Table of Contents

Advertisement

Normal Operation

Once the Envoy completes a scan, normal operation begins or resumes. At this point, the indicators in the
LCD screen show current values for your system. This is the home screen:
It may be a few minutes before energy data appears or increases on the home screen after starting up the
Envoy or initiating a scan. Information shown during normal operation includes:
Local IP address, for example: 192.168.2.140 (your actual local IP address will be different). The
Envoy attempts to get a dynamically assigned DHCP (Dynamic Host Configuration Protocol) IP
address during power-up sequence. The Envoy uses the DHCP IP address as a route to the
Internet. If 169.254.120.1 is shown, the Envoy has not yet acquired a dynamic IP. Refer to
"Troubleshooting" on page 29, if this address continues to display.
Web connection indication: +Web. The web status indicates whether the Envoy is connected to
Enlighten. The status -Web indicates that the Envoy is not connected to Enlighten.
Indication of the present power-production, in watts: (n)W (where n is a number)
Indication of the life time kilowatt hours reported to this Envoy: (n)kWh (where n is a number)
Indication of the number of online microinverters producing power, reporting in to the Envoy, and not
having any error conditions: (n) (where n is a number). At night, the number of microinverters
displayed is zero.
After the Envoy establishes an IP address and the web connection, the Envoy periodically contacts an NTP
(Network Time Protocol) server to maintain an accurate local time.

Using the Envoy LCD Menu

Use the Envoy Menu button
located on the right side of the
Envoy to access the Envoy
LCD menu.
1. Press and hold this
button. After two
seconds the Envoy
menu appears in the
Envoy's LCD screen.
2. Continue holding the
Menu button. Menu
items appear in the
following order:
20
192.168.2.140
2407W
783kWh
 2014 Enphase Energy Inc.
Envoy Installation and Operation
+Web
25
Menu
Button
141-00011 Rev 05

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Envoy env-120-01Envoy env-120-02Envoy iemu-03

Table of Contents