Description Of Individual Functions; Weighing Units (Unit) - KERN CME 100-3 Operating Instruction

8.4 Description of individual functions

8.4.1 Weighing units (Unit)

With the weighing scale switched off, press the ON/OFF- and TARE-key
simultaneously until "Unit" appears.
Conform by pressing the PRINT-key; the currently set weighing unit appears.
Use the 10x-button to select between the different units (see table).
By pressing the PRINT button the selected weighing unit is taken over.
Gram
Pound
Ounce
Troy ounce
Tael Hongkong
Tael Taiwan
Grain
Pennyweight
Momme
Tola
Carat
Freely selectable factor *)
*)
In order to enter an own conversion factor, press the 10x-button as explained above
until „FFA" is displayed. Confirm by pressing the PRINT key The last digit begins to
flash. Using the 20x-button, the displayed value is increased by 1, with the 5x-button
it is reduced by 1. Use the TARE button to jump one digit to the left. When all the
changes are ready, use the PRINT button to save this value and by pressing the
PRINT button the „Freely selectable factor" is taken over as current weighing unit.
22
Display Conversion factor
1 g =
g 1.
lb 0.0022046226
oz 0.035273962
ozt 0.032150747
tlh 0.02671725
tlt 0.0266666
gn 15.43235835
dwt 0.643014931
(mom) 0.2667
tol 0.0857333381
ct 5
FFA xx.xx
CDE/CME/CDEE-BA-e-1014