Calling A Phone Number Associated With A Camera; Switching Automatically Among Multiple Cameras - Panasonic KX-UT670 Operating Instructions Manual

Network Camera
Calling a Phone Number
Associated with a
Camera
You can call a phone number that is associated with a
network camera, called a paging number. The number
is dialled from Network Camera Viewer while the
camera's video feed is being displayed. The Phone
screen is not displayed.
1.
On the Home screen, tap
2.
In Network Camera Viewer, tap
3.
When you hear the confirmation tone, or the other
party answers, begin speaking.
4.
To end the call, press
Note
•
For details about registering a paging number,
see page 65.
68 Operating Instructions
.
.
.
Switching Automatically
among Multiple Cameras
You can have the unit cycle through the registered
network cameras and display each video feed in turn.
1.
On the Home screen, tap
2.
In Network Camera Viewer, press
3.
Tap [Camera Select].
4.
In the [Camera Select] list, tap [Sequential].
5.
Tap [Close].
Note
•
When automatic switching begins, the currently
selected network camera's video feed is
displayed first, and then video feeds are
displayed in the order in which cameras are
listed in the [Camera Select] list.
•
Selecting a network camera in the [Camera
Select] list ends automatic switching.
•
If you touch the display, automatic switching will
temporarily stop on the current video feed. To
resume switching, tap [Sequential] again.
While switching is temporarily stopped, doing
other operations such as selecting a network
camera ends automatic switching.
Setting the Switching Interval
You can change the length of time video feeds are
displayed before being switched.
1.
On the Home screen, tap
2.
In Network Camera Viewer, press
3.
Tap [Camera Select].
4.
Press .
5.
Tap [Sequential Interval].
6.
Tap the desired length of time.
Note
•
The factory default value is [10 seconds].
•
If automatic switching is already enabled, you
can skip step 4.
.
.
.
.
Document Version 2012-12