Adding A Contact From The Call Log; Adding Network Camera Information To A Contact - Panasonic KX-UT670 Operating Instructions Manual

Adding a Contact from the Call
Log
You can add contacts from phone numbers recorded in
the call log.
1.
On the Phone screen, tap [Call Log].
2.
Select the [Outgoing Call] tab, the [Incoming
Call] tab, or the [Missed Call] tab.
3.
Tap the record with the phone number you want to
add.
4.
Tap [Create new contact].
5.
Enter information as necessary.
6.
When you finish entering information, tap [Done].
Note
•
For details about the entry items, see page 58.
Adding a Phone Number to an
Existing Contact
1.
On the Phone screen, tap [Call Log].
2.
Select the [Outgoing Call] tab, the [Incoming
Call] tab, or the [Missed Call] tab.
3.
Tap the call record with the number you want to add.
4.
Tap [Add to contacts].
5.
Select the contact to add the phone number to.
6.
Enter information as necessary.
7.
When you finish entering information, tap [Done].
Note
•
For details about the entry items, see page 58.
Adding Network Camera
Information to a Contact
A network camera that has been configured to connect
to this unit can be added to a contact's information. The
video feed of a registered network camera can be
viewed during a conversation.
1.
On the Phone screen, tap [Contacts].
2.
On the Contacts screen, tap the contact you want
to add a network camera to.
3.
Press .
4.
Tap [Edit contact].
5.
Tap in [More].
6.
Tap next to the [Network camera/Website].
7.
Tap .
8.
Select a network camera.
9.
When you finish entering information, tap [Done].
Document Version 2012-12
Note
•
For details about entering text, see page 25.
Integrating Doorphone/Contact
If you want to relate the doorphone number stored in
contact with network camera, use the Doorphone
contact type for doorphone in addition to adding a
network camera information to a contact.
1.
On the Phone screen, tap [Contacts].
2.
On the Contacts screen, tap the contact you want
to add a network camera to.
3.
Press .
4.
Tap [Edit contact].
5.
Tap the label of phone number.
6.
Change the label of phone number to
[Doorphone].
7.
Enter doorphone number (2 digits).
8.
When you finish entering information, tap [Done].
Note
•
If you enter only 1 digit in DOORPHONE
Number, a 0 is added to the beginning of the
number automatically. For example, "5" is
changed to "05".
•
Valid doorphone numbers vary according to the
connected PBX.
•
This function is available only if the unit is
connected to a Panasonic KX-NS1000 PBX.
•
For details about the entry items, see page 58.
•
For details about entering text, see page 25.
Contacts
Operating Instructions 59